I recently started playing around with Autodesk’s Fusion 360 3D modeling and CAM software. I managed to fumble my way through making some quick designs and setting up a simple cam job to make a tool holder. Designing the part was quick and so was setting up the CAM operation. However when exporting the G-Code through the grbl post-processor I discovered the G-code was using G28 (return to home) which isn’t supported in a stock ShapeOKO 2. Limit switches would need to be installed for this to work and for it to be turned on in grbl. The default startup G-Code using the grbl post processor looks like this:
% (1) (T4 D=6.35 CR=0 - ZMIN=-19.525 - flat end mill) G90 G94 G17 G21 G28 G91 Z0 G90